Corrugated Sheet Flute Laminating Machine 2 Or 3 Layers Electric Type

Corrugated Sheet Flute Laminating Machine 2 Or 3 Layers Electric Type

 
Main Characteristics
 

• Adopting back pusher , back positioning feeding , equipped with spring side lay and bottom suction system , to make our machine suitable for all kinds of paper , and keep the good characteristics of easy operation and convenient maintain .
• The glue roller adopts high design , match with anilox to glue distributing , the uniformity of coating was improved greatly, increasing the intensity of draping , reduce the cost of customer production .
• The steel roller through the balanced treatment and test , match the tight assembling to make higher stability . And adopting the timing belt and tooth type belt driving , make the machine running with higher precision and lower noise.
• Adopting the liquid control system , automatic gluing , and the glue can be cycle used , avoid glue waste and labour strength .
• Self-developed high-strength feeder with high configuration electric system make the machine running stable and lower failure rate, the electric parts adopt international wide available brand or well-known Chinese brand.
• All material are inspected according to ISO-9001 standard and key parts as the harmonic gear and bearings are imported ones .
• This machine bottom paper is suitable for A, B , C, D, E, F flute . It can do 3 layer, 5 layer board to sheet laminating or thick board to board laminating . The surface paper need 200-600 GSM . With top paper advance and alignment function .

Technological Parameter
 

Main Configuration 
 

 
The main parts of this machine adopt the original products of domestic and foreign well-known manufacturers , long using life and good stability. The machine motor uses the well-known brands at home and abroad supporting, ensure the reliability of electrical components in the using process.