High Speed Corrugated Flexographic Printing Machine Die Cutting Slotting Machine 2 Colors

• Machine combine and separation

1) electric control machines with on-off alarm, continued between rang the bell warning, ensure that homework personnel security.

2) transmission shaft with friction type clutch, avoid mistake and damage the machine.

3) pneumatic type interlocking device.

4) host motor startup protection device.

• Lead edge send paper system

1) suction feeding, the blower 7.5 KW, can according to bend to ensure smooth feeding cardboard. (valve adjust air volume)

2) side baffle, pushing paper, back block box position adjusts by electric (digital control), baffle clearance before manual adjustment.

3) Skip feeding device. (according request, you can choose to delivery paper continuous or skip)

4) Counter for supplying paper, setting and displaying the production quantity.

5) Motorized and PLC control of feeder

• Dust removal system

• Send paper roller

1) external diameter ￠85 mm.

2) solid steel, parcel wear-resisting rubber, and make balance correction.

3) under feeding roller is with embossing hard chrome plating.

4) Feeding paper roller gap dial manual adjustment, adjusting range 0 ~ 12 mm.

• Auto-retn to zero device

1) send paper department, printing department, slotting of automatic electric zero.

2) general carton using automatic zero setting, make two pieces can adjust to the correct position, reduce the waste paper.

• Printing roller

1) external diameter ￠393 mm( including plate is 405mm).

2) steel pipe surface grinding, hard chromium plating.

3) make balance correction and keep operation steadily.

4) ratchet fixed roll version axle.

5) Hung Groove on each printing drum, suitable for 10 mm hang bar.

6) the print plate loading and unloading, the pedal switch electric control and reversing.

1) Steel pipe surface grinding with hard chrome

2) do balance correction and smooth operation.

3) printing pressure roller clearance dial manual adjustment, adjusting range 0--12 mm.

1) the top roller: external diameter ￠85 mm for solid steel, match three to deliver the paper ring.

2) the next roller: external diameter ￠155 mm for solid steel, the surface grinding, hard chromium plating.

3) to deliver the paper roller clearance dial manual adjustment, adjusting range 0 ~ 12 mm.

1) external diameter ￠215 mm. Steel pipe surface grinding, the suppression of anilox. Hard chromium plating.

2) Make balance correction and smooth operation.

3) the mesh number is 200-250 mesh for your choice.

4) cooperate with paper feeding system pneumatic type automatic lifting devices. (when feeding paper, anilox roll down to connect with printing plate, when stopped, please separate anilox roller and printing plate).

5) anilox roll with sphenoid clutch, ink, wash ink well when convenient and quick.

6) One unit is ceramic roll and doctor blade

1) external diameter ￠190 mm.

2) steel tube surface package wear-resisting rubber, and do balance correction.

3) rubber high special grinding, the ink effect is good.

1) Phase Adjustment with planetary gear structure, the phase can be adjusted correctly 360 degree.

2) Electricity phase adjustment, digital show .and memory function, when stopped to clean the slab rubber, and when start again, it will be restored data as original set before stop.

3) Electric digital adjusts the horizontal position, and the distance can adjust 14 mm.

4) In the printing process, will automatic reset system after cleaning plate.

1) pneumatic type diaphragm pumps, stable for ink, operate and maintain simple.

2) Ink filters, filtering impurities.

3) plastic ink tank.

1) cylinder brake institutions.

2) when the machine or adjusting the phase separation and the brake institutions limit the rotation, maintain the original position gear up.