|After-sales Service Provided:||Engineers Available To Service Machinery Overseas||Type:||Corrugated Paperboard Production Line|
|Automatic Grade:||Automatic||Driven Type:||Electric|
|Dimension(l*w*h):||According To Customer Request||Packaging Type:||Film|
corrugated paperboard production line,
carton production line
Corrugated Paper Sheets Cardboard Production Line Paper Corrugated Board And Box Making Machine
|Max. Working Width||2200mm|
|Min. Working Width||900mm|
|Max. Paper Mill Dia||1500mm|
|Main Shaft Dia||Φ242mm|
|Max. Working Pneumatic Pressure||0.6-0.9Mpa|
|Max. Supporting Weight (One side)||3T|
|Pneumatic Source Pressure(Mpa)||0.4---0.8Mpa|
Mill roll stand
Hydraulic Mill roll stand (YZJ2-2500 type. paper up and down,paper clip arm adopt hydraulic drive. it can proceed clamp, loose and move left and right at same time, double point pneumatic brake,expansion chuck,the hydraulic station valve is Taiwan brand.)
Cassette Single facer (KDW3-2500 type, Inner vacuum suction type, universal coupling drive, diameter of corrugated roller is 360mm, big and small roller design, the surface spray tungsten carbide,fast change corrugated roller within 20 minutes, adopt electric trolley to load corrugated rollers into single facer, locked by pneumatic. Glue isolation is controlled by PLC, gluing roller can run independently when single facer stop, the quantity of glue adjust automatically following the speed or manual. )
Surface paper pre-heater
Surface paper pre-heater(MY1-2500 , the diameter is 1100mm. The machine is electric adjustment for the heating area, inverted steam trap is Taiwan brand.)
Core paper heater
Core paper heater (XY1-2500, the diameter is 1100mm . The machine is electric adjustment for the heating area , inverted steam trap is Taiwan brand.)
Three layer pre-heater
Three layer pre-heater (DY1-2500, the diameter is 1100. The machine is electric adjustment for the heating area, inverted steam trap is Taiwan brand.)
Two layers pasting machine
Pasting glue machine(TJ2-2500 , it adopts pressure roller pasting , the pressing paper roller adopts electric adjustment with pneumatic control for the upper and lower. The quantity of the glue and the pressing paper gap adopt electric adjustment, with the touch screen shows the quantity of the glue, the glue quantity adopt auto control, It is equipped with breaking paper device and independent variable frequency motor drives each layer.)
Two layers over bridge conveyor
Two layers over bridge conveyor,GQ3-2500, the lifting department adopts independent variable frequency motor to drive , it is automatic synchronous running. automatic adjust the upper , middle and the downer paperboard neatly . It adopts absorption tension control , variable frequency motor to adjust the quantity of the wind. The breaking paper automatic detection device and two sets of control device with one is on the bridge, the other ison the ground.
Double-facer machine SM2-2500 type, 18pieces of hot plates, surface of it adopts grinding. It adopts concentrated pressing roller to make sure of the moulding quality. It is automatic hydraulic up and down, the pressure can be adjusted in three parts with the pneumatic adjustment.The heating plate display temperature with the panel , the cotton tape adopts the pneumatic to adjust the up cotton belt tension. the up cotton belt adopt automatic correction and with the manual adjustment for the under cotton belt tension. the main motor adopts frequency motor.
Main drive unit
Heavy type main drive(ZCD2-2500,the main motor adopt invertor motor with variable frequency conversion control)
The NC slitter scores machine (2500 type, five slitters and eight socrers. It adopts precise ball screw to drive and the linear guide orientation, computer control and automatically arrange the order. Positioning accuracy is± 0.5 mm,lines pressing type with electric conversion,computer control automatic sharpening, the whole machine electric correction. the slitter and scorer shaft adopt inverter control. automatic synchronization operation.
Pneumatic transmit paper frame
GZJ-2500 Pneumatic transmit paper frame,automatically transmit the paper after slitter scorer machine to cut off machine by up and down layers
Double Layers Computer Rotary Cutting Off Machine
Double Layers Computer Rotary Cutting Off Machine(SHQ2-2500 type,Double layers rotary cutting off blades, adopt AC servo motor from Italy. Multiple orders processing function, can change manually or automatically. Feeding and outputting board by frequency control,automatic tracking the speed of corrugation line, cutting off length 400-9999mm. PLC System is from Taiwan.
Double Layers Computer Counting Stacker
Double Layers Computer Counting Stacker(SDM2-2500 type, Two layers of stacking, multiple belts longitudinal transportation in each layer, driven by frequency motor, automatic tracking the speed of corrugation line, vertical transport sheets by electric motor. Sheets stacking table is controlled segmented pneumatic, sheets baffle is adjusted automatically to adapt the length of sheets. Counting, transporting, stacking are controlled by PLC system, max length of sheets are 3000mm.
The steam system
The steam system, each unit is designed as a independent unit to supply the steam , independent straight transmit water. The steam pipe and the rotary heating connector adopt flexible metal tube to connect. The machine is equipped with pressure monitoring table. It can adjust the steam pressure to control the working temperature, the steam trap adopt Taiwan brand.)
Glue making system
The glue circular system (the main glue barrel, the carrier glue barrel and glue storage barrel is one set. the main glue barrel adopts electromagnetic motor to control. The single facer and the pasting glue machine adopts independent glue barrel . Each equipment with glue, glue supply to them circularly, and the level is controlled automatically .
Air compression system
Air compression system (it adopts 1.0 m³ air collector pot and the air filter to make up a air compression station , the air compression is provided by the customer.
The electric system
The electric control system , part of the component adopts Schneider, Delta Taiwan, Fatek Taiwan and the other famous brand product, PLC to control , the touching screen to show the data and control. it is equipped with the usual working condition display board, the production and speed shows all the time . The speed of the whole line adjusts synchronously. The main power adopts variable frequency motor to control.
Trolley and rail
SZ-2500 trolley and rail, the rail is 6 meters length.