Payment & Shipping Terms:
|Collect Paper Table:||Hydraulic Type||Function:||High Effieciency|
|Usage:||Corrugated Waste Cleaning||Material:||Steel|
|Warranty:||1 Year||After-sales:||Engineer Available To Service Machinery|
corrugated carton making machine,
corrugated box manufacturing machine
Stainless Steel Automatic Corrugation Machine Waste CleaningWith Vibrating Belt
1. Integrated style structure: solid and stable. Install wheel axle. Freely adjust work position.
2. Combined application design for chip-removing brush and chip-removing blower can guarantee result of removing chip.
3. High elastic round belt has long service life and cannot damage paperboard.
4. Height of belt and chip-removing brush can be adjusted.
5. Trash conveying unit: frequency conversion speed regulation can freely adjust speed of trash cleaning.
6. Speed should be synchronous with printing die-cutting machine.
7. To conveyor the waste paper out of the machine by motor and belt. The vibration device can adjust frequency and vibrate the conveying belt to make waste scrap fall during conveying, air blowing after belt to blow off waste scrap.
8. Two stage conveying belt, first one by pneumatic up/down and has oscillator stripping, easy operate.
1, Contral Operate:
(1) All the motors of the waste cleaning machine are separately controlled by the independent button, and can be operated independently according to the production requirements.
(2) With Sudden- Stop Protection Device to make sure the operating safety.
2, Front-end Paper Receiving Arm:
(1) Adopted pneumatic lifting structure, which can suit for die cutting height of
different printing machine and convenient for front-end print machine to
dismantle and mount the templates.
(2) Equipped with iron trim strip paper pressing mechanism and a medium-
pressure fan, which can make the paperboard smooth and smooth into the
waste main transmission bearing.
3, Vibrating Belt:
(1) Vibrating belt is imported cylindrical high elasticity belt, not easier to aging and hard to damage the paperboard under high-speed vibration.
(2) The belt shaft with a semicircular groove,can adjust the belt position flexibly
to adapt to the production needs of various irregularly shaped paperboard.
(1) The main transmission bearing by independent motor, consisted by four whole bearings with concave wheel surface, divided into the top and bottom of each two, and on the wheel surface every ten centimeters a groove, it easy to adjust the belt freely according to the actual size of the carton board, to ensure that the special-shaped carton passed smoothly and avoid causing the damage to the cardboard.
(2) The vibration bearing drive is controlled by an independent motor, and can
be controlled separately. The speed adjustment is convenient, and can ensure
the jitter stroke.
(3) The vibration bearing is operated with two bearings, and each axis has three chattering points, so as to speed up the jitter frequency and improve the jitter effect.
5, Vibrating Cleaner System :
(1) The front-end of the waste cleaner is equipped with medium-pressure fan to achieve the effect of waste cleaning and at the same time make the paperboard close to the conveyor belt for smooth delivery.
(2) The waste cleaning mechanism is composed of dual vibrating cleaning structures. Each one is driven by an independent motor, and can achieve better effect of waste paper removal through different vibrating frequencies.
(3) The rear-end of the waste cleaner is equipped with axial fan and brush device so that the vibrating waste paper can fall from the paperboard in order to achieve the best cleaning effect.
(4) The plane belt equipped on both sides at the bottom of the waste cleaner and the waste paper division board equipped at the rear end, convenient to match the waste paper output belt to completely output the waste paper, reducing waste paper cleaning.
|Voltage of Product||V/Hz||380V/50Hz||380V/50Hz||380V/50Hz|
|Paper receiving Height||mm||Customized||Customized||Customized|
Contact Person: Cristina Meng