Payment & Shipping Terms:
|Design Speed::||200pcs/min||Economic Speed::||180pcs/min|
|Roller Diameter::||ø380||Max. Paper Size::||1200x2400mm|
|Min. Paper Size::||300x500mm||Voltage:||380V/400V/415V Or Others|
|Driven Type:||Electric And Pneumatic||Warranty:||1 Year|
|Wallboard Thickness::||50mm||Application:||Machinery & Hardware|
415V Folder Gluer Machine,
200pcs/min Folder Gluer Machine
Lead Feed Printing Waste Paper Down Folder Gluer Automatic Corrugated Machine
1. Can be set up continuous or skip feeding cardboard.Have counter automatic corrugated machine
2. Automatic corrugated machine lead feeder increased suction flow rate, feed more smoothly and accurately. Automatic corrugated machine frequency conversion adjust vacuum and airflow, to fit for the board size.
3. Formfeed roller have double glue, maintain inner lining soft and rigid.
4. outer, flexibility and ensure that the surface wear-resisting. Reduce the cardboard to be compressed.
5. Dust removal device, seven dust removal device, brush and fan can remove cardboard surface paper scrap, can be adjusted according to the size of the cardboard section.
6. Computer control to adjust feed roller clearance,left and right side baffle position.
7. The rear paper holder is electrically controlled front and back to accelerate the setting speed.
8. Host motor have protection device (the machine without solid lock, the host can't start running).
Electric controls the machine and with alarm bell so that can guarantee the safety of the operator.
The shaft has safety clutch attached, to avoid misoperation damage the machine.( If the machine is not fixed, the main energy will unable to start.)
Pneumatic interlocking device
Motor is used to start protection device
Lead edge feeding system:
Lead edge feeding can be the most greatly reduce the blocking phenomenon in the process of fending paperboard.
Suction motor auxiliary feeding, to ensure the curved board feed smoothly, air volume can be adjust according to the size of paperboard, the maximum guarantee ability of vacuum adsorption, make feed paper more accurate.
Front baffle and tailgate adjust gap manually, the left and right side platens of feeding paper adjust gap electric.
Feed wheel is made with polyurethane materials, high friction and long durability.
Suitable for three or five layers corrugated board, including E corrugated board.
Feeding paper counters, setting, display production quantity.
Baffle around electric regulating pneumatic automatic neat.
Brush dust-removal equipment with dust-absorption blower. This equipment can clear the dust on the surface of the cardboard, improve the printing quality.
1)Outer diameter : Ф154.3mm.
The external diameter is Φ154.3mm
2)The surface of the steel tube is endure decay rubber and could make balance correction.
3)The below paper roller chrome plated
4)The feeding roller gap is manual adjustment. The adjustment range is 0-11mm
Operation control switch (PLC computer control):
Control panel is equipped with 10 inch touch screen, can control paper feeding part, printing part, die cutting part, easy to operate.
Automatic zero-returning unit:
The feed unit, printing unit and die-cutting unit all have electric “Automatic zero-returning”
Automatic zero setting, in order to ensure that the unit have unified adjust benchmark, generally two sheets of cardboard printing can adjust the correct position, reduce the waste of the cardboard.
Machine inside width
Max production speed
Economic operation speed
Max paperboard size
Min paperboard size
Max printing area
Every next paper size
Stand printing plate thickness
Adapt the thickness of paperboard
Min slotting interval
Max slotting depth
Printing roller axial adjust
Contact Person: Amber Gu